GUANGDONG SHANAN TECHNOLOGY CO.,LTD
GUANGDONG SHANAN TECHNOLOGY CO.,LTD
Add to Cart
Automatic FDA Standard Conveyor Belt Food Metal Detector in Food Processing Industry
1. A variety of magnetic and non-magnetic metals (such as iron, stainless steel, aluminum, etc.) even if the metal embedded in the food products could be indentified by this kind of conveyor belt food grade metal detector.
2. Double circuit signal detection circuit adopted with high sensitivity and strong anti-disturbance ability.
3. Function of the double circuit signal demonstration: The signal light will demonstrate different induction according to the size and weight of the metal as the metal objects are detecting.
4. Function of adjusting products effect automaticly: Food such as moist products, products contains sugar or salt and so on which can make the machine react signals of metal, however there is actually no metal in food, then it gets wrong information from the products and impact on the detection results. Therefore, using this machine with this function can reduce the products’ effect which can help people to get more accurate detection results.
5. Functions of avoiding missing detection: The nombers of signal amount will be recorded automaticly when there are several kinds of metal signal passing. So it won’t miss the detection.
6. Control system: ADLINE microprocessor controller.
7. Conveyors: FDA grade conveyor belt adopted imported white ones safe to food.
8. The special conveying mechanism is designed to maximize the sensitivity of the metal detector.
9. Flexible modular design can be customized according to different requirements.
10. Mirrored stainless steel with open transport system for easy cleaning.
11. Meet the requirements of IFS and HACCP certification. There are a variety of options excluded institutions depending on the application.
The equipment must achieve the following:
|
Modle
| SA-990 | ||||||
|
Detecting Height(mm) | 100 | 120 | 150 | 200 | 250 | 300 | 350 |
|
Detecting Width(mm)
| 400 | 400 | 400 | 400 | 400 | 400 | 400 |
|
Belt length(mm)
| 1330 or size customized | ||||||
|
Detector sensitivity
| Feф≥0.6 | FeФ≥0.8 | FeФ≥1.0 | FeФ≥1.2 | FeФ≥1.5 | FeФ≥2.0 | FeФ≥2.5 |
| SUSф≥1.0 | SUSФ≥1.2 | SUSФ≥1.5 | SUSФ≥2.5 | SUSФ≥3.0 | SUSФ≥3.5 | SUSФ≥4.0 | |
| N-Feф≥1.2 | N-FeФ≥1.5 | N-FeФ≥1.0 | N-FeФ≥2.5 | N-FeФ≥3.0 | N-FeФ≥3.5 | N-FeФ≥4.0 | |
|
Speed of conveyor belt
| 25-30 m/min | ||||||
|
Load ability
| 5-25 KGs | ||||||
|
Height from belt to the earth
| 650 mm ± 50 mm (Customized service available) | ||||||
|
Reject Ways
| Sound alarm and light with belt stoped automaticly; (when there is an automatic rejection system ,belt continues and rejects the goods ) | ||||||
|
Application
| For food processing industry | ||||||
|
Work Environment
| Temperature -10℃-40℃ ,relative humility 30-90% no condensing | ||||||
|
There may be metals pollutants during food processing. Since it is used abundantly at all stages of food processing, it is often found in finished food. It is essential to get rid of and pick out before the packaging stage and then to make sure the safety of consumers and the legitimacy of your company.
|
|
Metal detectors dedicated specifically to the food industry should be one of essential equipments for any areas of food production, including baked goods, fruit and vegetables, dairy, fish, meat, cereals, beverages and more. Take the vegetable processing industry as an example, there is always a risk of pollution from metal through broken equipment or delivery because for a wide range of processing metal machines taken part in processing various of vegetables.
|
|
There is also the risk of sabotage within food production, especially as a large percentage of product is imported from overseas where rules and regulations are not necessarily as strict as the United Kingdom's. The risk of sabotaged food product reaching to the consumer is greatly reduced by food metal detector.
|
|
Work out the type of metal that needs to be tested. There are two main types of metals: ferrous and non-ferrous. The ferrous metal comes from iron. Non-ferrous metals are all others. Carefully check the types of metals that may eventually appear in your product. |
|
What size of metal contaminants you need to filter out? You need to be pragmatic and realistic because if you specify too much kinds of sensitivity, you will get too many negative alarms. |
|
Know the operating environment and product characteristics much - The operating environment (including temperature, whether, water, dust and chemicals) may make a imfluence on the detecting results by contacting with metal detectors and possible electric fields. In addition, is the product fresh or frozen, and the package is still exposed, scanned separately or in a box? All of these factors will be used to design the metal detector that best meets your needs. |
|
Reject System Considerations - The most common is a usage of propellers or blowers to transfer metal-detected products. However, you can save room by stopping the conveyor and starting the warning light. In addition, an optional lockable collection container prevents unauthorized employees from accessing rejected products.
|
| Food & Beverage Manufacturers |
| Food & Beverage Processors |
| Food & Beverage Distributors |
| Food & Beverage Storage Facilities |
| Food & Beverage Importers |