304 Stainless Steel Food Safety Detector , Meat / Bakery Metal Detection , HACCP Accreditation

304 Stainless Steel Food Safety Detector , Meat / Bakery Metal Detection , HACCP Accreditation

About Shanan.pdf

Key features​

• Can identify a variety of magnetic and non-magnetic metals (such as iron, stainless steel, aluminum, etc.)even if the metal embedded in the products.​

• 100 kinds of parameter can be store.

• Adopts the double circuit signal detection circuit, high sensitivity and strong anti-disturbance ability.

• Has the double circuit signal demonstration function. When the metal good is passing, the signal light will demonstrate different induction according to the size of the metal.

• Has the adjustment function of products effect, such as moist products, products including sugar or salt, they all can make the machine has the signal of metal, which is actually has no metal, so it gets wrong information from the products and affect the detection result. So use this machine with this function can reduce the products’ effect to get better detection result.

• Can avoid missing detection. When several metal signals are passing, the machine will automatically record the signal amount, so it won’t have missing detection.

• Control system: microprocessor controller.

• Conveyors: Joint-body PU (polyurethane) Conveyor.

• Special transport mechanism designed the maximize sensitivity of metal detectors.

• Flexible modular design can be customized according to different requirements.

• Mirror stainless steel with open transport system. Easy to clean.

• Conveyer belt adopts imported white ones safe to food.

• Meet the requirements of IFS and HACCP certification. There are a variety of options excluded institutions depending on the application.

• Stainless steel housings provide total shielding against transient influences (e.g., two way radios) that cause false/nuisance tripping Sensing for metal from three (3) sides provides maximum protection product flows through the detector

• Molded as an integral part of the fiberglass section, creating a strong sensing grid and protecting the coils from damage, even in harsh environments

• Built to fit with or without existing conveyors easy integration into production lines

Advantages​

1. Digital frequency and phase control to avoid drifts - after initial setup, no further adjustment of electronics is needed
2. Digital noise filters - eliminates undesirable signals such as vibrations and shocks
3. Multi-channel technology - allows optimum recognition of metals

Detect all Types of Metal Including Stainless Steel

Using a tunnel-type metal detector, it is possible to detect all kinds of metal contaminants, including ferrous, non-ferrous and even difficult to detect grades of stainless steel. When integrated with conveyor equipment, tunnel metal detector systems can provide advanced metal detection and rejection solutions for food and non-food processing applications.

Application-Specific Solutions

With a wide range of aperture size ranges and feature sets, Safeline tunnel metal detectors for conveyor systems offer an ideal solution to detect all types of metal for inline food and non-food processing applications.

Stable, Reliable Metal Detection

All METTLER TOLEDOR Safeline tunnel metal detectors incorporate robust construction standards to provide stable, reliable, and consistent metal detection performance to detect all types of metal in a wide range of food and non-food processing applications, regardless of the working environment.

Metal Detector Operation

Built-in performance verification routines to comply with retailer codes of practice and food safety regulations are standard in Safeline tunnel metal detectors for conveyor applications. A range of connectivity options and protocols are available to support your data collection and compliance needs.

Warranty

12month labor and parts

Full life technical support

Packing and shipment

Full machine takes of two layer package

Prepackage takes of plastic bags conveyor the full machine and the key parts have foam plastic protection

Eng package takes of Strong ploy wooden case that meet different country import standard

Installation and use

When you takes of the package .up the rubber base ,use wheel move it to your work place.

Then down the rubber base and fasten it..keep all the base in a horizontal

.

Sensitivity reference

Optional reject 1 :Push rod

Optional 2 flap drop

Optional 3 Air blast

Why are Metal Detectors so Important for the Food Industry?

Within the food production industry, there is perhaps no bigger contaminant material than metal. Due to its abundant use in all stages of food processing, the material is often found in the raw foodstuffs. It is essential that this is located and move before the packaging stage to guarantee the safety of consumers and the legitimacy of your company.

Metal detectors catering specifically to the food industry should be a compulsory piece of equipment for any area of food production, including baked goods, fruit and vegetables, dairy, fish, meat, cereals, beverages and more.

With the vegetable processing industry for example, the sheer range of products catering to a variety of vegetables means that here is always a risk of contamination from metal, through broken equipment or delivery.

There is also the risk of sabotage within food production, especially as a large percentage of product is imported overseas where rules and regulations are not necessarily as strict as within the United Kingdom. By having a metal detector, the risk of sabotaged food product reaching the consumer is greatly reduced.

What can a be detected?

Almost all metal detectors in the food industry are able to detect three core groups of metal contaminants:

Ferrous metals are easily detected as they are both magnetic and conductive
Non-Ferrous metals are non-magnetic but are strong conductors and are therefore easily detected.
Stainless steel contaminants are perhaps the toughest to pick up because of their poor conductivity and non-magnetic. However, most reliable metal detectors designed for food production will be able to detect these contaminants.
Generally, there are four types of metal detectors that are popular within the food industry:

Search Heads are used frequently for inspection of fruits, vegetables, cereals, meats and bread.
Conveyor based Systems are used frequently for inspection of fruits, vegetables, cereals, meats, yogurt and bread.
Pipeline for Pumped Products are used frequently for beverages, sauces, soups and dairy.
Vertical Fall Systems are used frequently for powders, grains and granules.

Standard replace use Layout parts :

One set of hex wrench

Full sets of the range calibration test cards(Ferrous,non-ferrous ,Stainless steel)